REMOTE TEST STATION STROBE
Part Number:
RTS2AOS
Brand:
System Sensor
System Sensor Innovair Flex RTS2-AOS Multi-Signaling Unit, LED Display, 85 dB at 10 ft
System Sensor Innovair Flex Multi-Signaling Unit, 85 dB at 10 ft Alert, 95% Humidity Rating, LED, 14 to 140 deg F Operating, White, 5.3 in H x 4.8 in W x 1.6 in D
- RTS2-AOS is a multi-signaling accessory, with strobe, designed to work with InnovairFlex 4-wire conventional duct smoke detectors, AOS stands for Add On Strobe
- Standby (green blink), trouble (amber), maintenance (amber blink) and alarm (red) LEDs to indicate detector status
- Keyswitch to select desired sensor, enable test/reset button and sensitivity reading
- Test/reset button
- Selectable continuous or temporal tone
- AOS add on strobe (included on RTS2-AOS model)
- Provisions for single or double gang box mounting
- Ability to discretely monitor two sensors when duct smoke detectors are configured in a 2 to 1 set up (See InnovairFlex duct smoke detector manual for reference)
- Sounder 85 dBA at 10 ft
- 20 to 29 VDC
- Strip terminal, 22 to 14 AWG wire connections
Standards/Approvals: FM Approved|UL 268 and ULC S529-02
Includes: (1) RTS2 or RTS2-AOS Multi-Signaling Accessory, (1) Mounting Hardware Kit (Contains (2) Sets of Mounting Screws and (1) Tamper-Resistant Outer Cover Mounting Screw
Includes: (1) RTS2 or RTS2-AOS Multi-Signaling Accessory, (1) Mounting Hardware Kit (Contains (2) Sets of Mounting Screws and (1) Tamper-Resistant Outer Cover Mounting Screw
.png)
.png)
