B-VENT 3" - 8" DIA X 12" ADJ ROUND PIPE
Part Number:
4M12A
METAL-FAB 4M12A M Series Type B Double Wall Round Gas Vent Pipe, Aluminum, 4 in ID Dia x 12 in Adjustable L, Domestic
Stock Notice
Not enough Inventory? Submit your email address and desired total quantity below, and we will notify you when stock arrives.
METAL-FAB Gas Vent Pipe, Type B Double Wall Round, Series: M Series, 4 in ID Dia, 12 in Adjustable Length, 1/4 in Thickness, Aluminum, Domestic
- Elimination of sharp edges by hemming the flue and casing
- Assembly and disassembly, without tools, using positive twist-lock
- 360 deg rotation of small dia fittings using swivel tees, wyes, and elbows
- Space savings inside standard stud walls using oval pipe
- The vent shall be of the double-wall, Factory built type for use with approved category I appliance burning natural or LP gas, which produce flue gases exhausted at temperatures not exceeding 550 deg F
- The vent shall be constructed of an outer wall of galvanized steel 0.018 in THK G-90 for sizes 3 to 14 in Dia and 0.024 in THK G-90 for sizes 16 to 30 in Dia
- The inner wall shall be constructed of aluminum alloy 0.012 in THK for sizes 3 to 8 in Dia and 0.018 in THK for sizes 10 to 30 in Dia
- The vent pipe shall incorporate a push-tab locking system to prevent disassembly of vent during or after installation
- Vent shall be tested and listed for a min clearance to combustibles of 1 in for sizes 3 to 24 in Dia and 2 in for sizes 26 to 30 in Dia
- Type B-Vent shall be installed in accordance with the vent manufacturers installation instructions, UL listing and state or local codes
- Type B-Vent shall be warranted by the manufacturer against defects in material and workmanship for a period of one (1) year from the date of the original installation
- Vent overlaps 1.5 in when joined together
- Type B-Vent products shall be listed to UL-441 and carry the appropriate UL or cUL listing mark or label
- Air insulation
Standards/Approvals: NFPA-54/211|UL 441